文章基本信息

标题：A Two-DOF Fast Tool Servo for Optical Freeform Surfaces Diamond Turning
本地全文：下载
作者：Qiang Liu ; Xiaoqin Zhou ; Pengzi Xu 等
期刊名称：Advances in Mechanical Engineering
印刷版ISSN：1687-8140
电子版ISSN：1687-8140
出版年度：2014
卷号：2014
DOI：10.1155/2014/527975
出版社：Sage Publications Ltd.
摘要：Fast tool servo (FTS) technology is considered as the most popular technology to fabricate freeform optical lenses and micro- and nano-structured surfaces. Aiming at the disadvantages of existing single DOF FTS systems, this paper described a two-DOF FTS. Cross shape flexure hinges are designed as the guide mechanism, and two voice coil motors (VCMs) are selected to drive the tool motion. The FTS offline performance is tested, and the following error is about less than 0.1 μm; the motion resolution is 0.05 μm. A sinusoidal surface is machined to verify the cutting performance of the novel FTS, and the surface roughness is Ra 27 nm. The test results show that the two-DOF FTS system works well on the fabrication of optical freeform surfaces.