文章基本信息

标题：The Effect of Perforation on the Dynamics of a Flexible Panel
本地全文：下载
作者：A. Putra ; Y. M. Cheah ; N. Muhammad 等
期刊名称：Advances in Acoustics and Vibration
印刷版ISSN：1687-6261
电子版ISSN：1687-627X
出版年度：2014
卷号：2014
DOI：10.1155/2014/526045
出版社：Hindawi Publishing Corporation
摘要：Introduction of holes into plate-like structures is commonly found as one of the practical noise control measures to reduce sound radiation. However, perforation also reduces the panel stiffness and hence increases its vibration. The discussion on this effect is lacking and hence this paper discusses the dynamics of a perforated panel from the results obtained from Finite Element (FE) model. Different hole geometries and arrangement are simulated to investigate their effect on the plate mobility. In general, it is found that increasing the perforation ratio increases the plate mobility. For a fixed perforation ratio, the mobility increases at high frequency (above 1 kHz) for a smaller hole density in the plate. The plate with holes concentrated at the middle shows the largest increase of vibration around the plate centre compared to those uniformly distributed or away from the middle and concentrated at the plate edges. This is because as the hole separation becomes smaller, the reduction of the global stiffness around the mid area of the plate becomes greater. This also corresponds to the finding here that the mobility is greater at the vicinity of the hole. Different conditions of the plate edges are found to give consistent trend of the effect of perforation.