文章基本信息

标题：Effective Parameters on Performance of Multipressure Combined Cycle Power Plants
本地全文：下载
作者：Thamir K. Ibrahim ; M. M. Rahman
期刊名称：Advances in Mechanical Engineering
印刷版ISSN：1687-8140
电子版ISSN：1687-8140
出版年度：2014
卷号：2014
DOI：10.1155/2014/781503
出版社：Sage Publications Ltd.
摘要：A parametric analysis is performed for numerous configurations of a combined cycle gas turbine (CCGT) power plant, including single-pressure, double-pressure, triple-pressure, triple-pressure with reheat, and supplementary triple-pressure with reheat. The compression ratio of the gas turbine and the steam pressure of the steam turbine are taken as design parameters. The thermodynamic model was developed based on an existing MARAFIQ CCGT power plant and performance model code developed using the THERMOFLEX software. The results show that the highest overall power and thermal efficiency occur for the supplementary triple pressure with reheat CCGT configuration. The overall efficiency increases with an increase of the compression ratio to 18–20, depending on the configuration of the CCGT, and then decreases with any further increase of compression ratio. The triple-pressure with reheat CCGT configuration has the highest overall thermal efficiency. The specific fuel consumption decreases with an increase of the compression ratio to 18–20, and the triple-pressure with reheat CCGT has the lowest specific fuel consumption. The simulation model gives good results compared with the MARAFIQ CCGT power plant. Consequently, it can be stated that the compression ratio and steam pressure strongly influence the overall power and thermal efficiency of CCGTs.