期刊名称:International Journal of Energy and Environment
印刷版ISSN:2076-2895
电子版ISSN:2076-2909
出版年度:2012
卷号:3
期号:6
页码:871-880
出版社:International Energy and Environment Foundation (IEEF)
摘要:Environmental degradation and depleting fuel reserves are matters of great concern around the global. Solid waste plastic is currently receiving renewed interest for fuel generation. Waste plastic to fuel is suitable for compression ignition engines and more attention is focused in the world because of its potential to generate large-scale employment and relatively low environmental degradation. A post-commercial PS polymer waste was thermal degradation and fractional distillation without catalysts using a steel reactor operating thermally at ambient pressure under fume hood without vacuum system. Two types of temperature profile was used for this experiment such as PS waste plastic liquefaction purposed temperature used 100-400 ºC and fractional column distillation temperature was used 180-305 ºC for collection kerosene or aviation grade fuel. Produced fuel was analyzed by using gas chromatography and mass spectrometer and fuel hydrocarbon range showed into GC/MS analysis is C6 to C16.