Molasses, the main material of this project was diluted and processed, according to the type of the
used ultra and nano membranes (UF10kDa, UF5kDa, N30F). Permeate flux was determined at different times for
membranes and steady time was registered. By changing transmembrane pressure, permeate flux, which is
dependent on the pressure, was registered. Final permeate flux was registered in each transmembrane pressure
and for each membrane and the results were compared finally. The comparison was completed by the rejection
calculation for three membranes. The results show that both the ultra and nano membranes have clarified the
permeate solution but the rejection for N30F membrane was the greatest, around 0.8 and after that UF5kDa
membrane had higher rejection than UF10kDa membrane. For N30F membrane, Brix, viscosity and sucrose
concentration in permeate flow decreased. So by evaluating used membranes on separation of sugar from
molasses, it was resulted that N30F membrane has been more appropriate.