文章基本信息

标题：Análise Elasto-Plástica 3-D Pelo Mef Generalizado.
本地全文：下载
作者：Paulo de Tarso R. Mendonça ; Eduardo A. Fancello
期刊名称：Mecánica Computacional
印刷版ISSN：2591-3522
出版年度：2002
卷号：XXI
期号：13
页码：1187-1202
出版社：CIMEC-INTEC-CONICET-UNL
摘要：In the last few years a number of numerical methods, later designated by the collective
name of “generalized …nite element methods”, have been developed. Among those methods
one can refer to the GFEM, Free Galerkin Method, hp-Clouds Method and Partition of Unity
(PUFEM) method. Applications of the last two of then have been successfully developed for
linear analysis based on Timoshenko beams, 2-D elasticity, plate and shells structural elements,
through both, domain and boundary formulations.
This paper describes a …rst application of the Partition of Unity method to small strain
elasto-plasticity analysis. Following the method, a partition of unity is de…ned over the domain
with reference to brick solid elements. Next, the hp-Cloud method is used to perform
p-enrichment. The p-enrichment consists of globally de…ned polynomial. This global characteristic,
as opposed to the standard form, based on local, intrinsic coordinates, is a source of the
low mesh distortion sensitivity exhibited by the method. Also, it allows enrichment in particular
regions and directions of the model (as corners and boundary layers), in a very predictable way.
Classical elasto-plasticity model is used, with linear mixed hardening, J2 plastic surface and
radial return method for stress integration. Preliminary numerical results are shown, which
indicate good behavior of the formulation with respect to mesh distortion. Also, a clear demonstration
is made, of the singularity which arises in the sti¤ness matrix of an undistorted element
generated by this class of methods.