文章基本信息

标题：Comparison of Li 2 CO 3 -Na 2 CO 3 -K 2 CO 3 , KCl-MgCl 2 and NaNO 3 -KNO 3 as heat transfer fluid for different sCO 2 and steam power cycles in CSP tower plant under different DNI conditions
本地全文：下载
作者：Tauseef A Khan ; Jawad Sarwar ; Muhammad Adeel Khan 等
期刊名称：Advances in Mechanical Engineering
印刷版ISSN：1687-8140
电子版ISSN：1687-8140
出版年度：2021
卷号：13
期号：4
页码：1
DOI：10.1177/16878140211011900
出版社：Sage Publications Ltd.
摘要：This work presents the characteristics of a solar thermal tower power plant in two different places (Seville and Dubai) using three different HTFs (NaNO 3 -KNO 3 , KCl-MgCl 2 and Li 2 CO 3 -Na 2 CO 3 -K 2 CO 3 ) and three different power cycles (Rankine, sCO 2 Recompression and sCO 2 Partial cooling cycles). An indirect configuration is considered for the Gemasolar power plant. Detailed modelling is carried out for the conversion of incident power on the heliostat to the output electricity. Optimization of the cycle is carried out to determine the most promising cycle configuration for efficiency. The results showed that for the Gemasolar power plant configuration, the performance of the KCl-MgCl 2 based plant was poorest amongst all. NaNO 3 -KNO 3 based plant has shown good performance with the Rankine cycle but plant having Li 2 CO 3 -Na 2 CO 3 -K 2 CO 3 as HTF was best for all three cycles. Partial cooling was the best performing cycle at both locations with all three HTFs. Placing the Seville Plant in Dubai has improved the efficiency from 23.56% to 24.33%, a capacity factor improvement of 21 and 52 GW additional power is generated. The optimization of the plant in Dubai has shown further improvements. The efficiency is improved, the Capacity factor is increased by 31.2 and 77.8 GW of additional electricity is produced.
其他关键词：Solar thermal tower power plant ; NaNO 3 -KNO 3 receiver ; KCl-MgCl 2 receiver ; Li 2 CO 3 -Na 2 CO 3 -K 2 CO 3 receiver ; sCO 2 cycle ; Optimization of solar thermal plant