文章基本信息

标题：Revealing the intersectoral material flow of plastic containers and packaging in Japan
本地全文：下载
作者：Jun Nakatani ; Tamon Maruyama ; Yuichi Moriguchi 等
期刊名称：Proceedings of the National Academy of Sciences
印刷版ISSN：0027-8424
电子版ISSN：1091-6490
出版年度：2020
卷号：117
期号：33
页码：19844-19853
DOI：10.1073/pnas.2001379117
出版社：The National Academy of Sciences of the United States of America
摘要：The Japanese government developed a strategy for plastics and laid out ambitious targets including the reduction of 25% for single-use plastic waste and the reuse/recycling of 60% for plastic containers and packaging by 2030. However, the current usage situation of single-use plastics including containers and packaging, which should be a basis of the strategy, is unclear. Here, we identify the nationwide material flow of plastics in Japan based on input–output tables. Of the domestic plastic demand of 8.4 Mt in 2015, 1.6 and 2.5 Mt were estimated to be for containers and packaging comprising household and industry inflows, respectively, through the purchase/procurement of products, services, and raw materials. Considering the current amount of recycling collected from households (1.0 Mt) and industries (0.3 to 0.4 Mt), the reuse/recycling target has already been achieved if the goal is limited to household container and packaging waste, as is the focus of Japan’s recycling law. Conversely, the results indicate that it will be extremely difficult to reach the target collectively with industries. Therefore, it is essential that efforts be made throughout the entire supply chain. Food containers and packaging that flowed into the food-processing and food service sectors accounted for 15% of the inflow of containers and packaging into industries. Thus, the key to achieving the reuse/recycling target will comprise the collection of plastic food packaging from not only households but also the food industry. Furthermore, the collection of flexible plastic films used between industry sectors will put the target within reach.
关键词：plastic container and packaging ; material flow analysis ; input–output table ; recycling rate ; Japan