文章基本信息

标题：Three-Dimensional Printing of the Nasal Cavities for Clinical Experiments
本地全文：下载
作者：Olli Valtonen ; Jaakko Ormiskangas ; Ilkka Kivekäs 等
期刊名称：Scientific Reports
电子版ISSN：2045-2322
出版年度：2020
卷号：10
期号：1
页码：1-7
DOI：10.1038/s41598-020-57537-2
出版社：Springer Nature
摘要：Abstract 3D printing has produced many beneficial applications for surgery. The technique´s applicability in replicating nasal cavity anatomy for clinical use has not been studied. Our aim was to determine whether 3D printing could realistically replicate the nasal cavities and the airflow passing through them from a clinical point of view. We included Cone Beam Computed Tomography (CBCT) scans of five patients with symptoms of chronic nasal congestion. These CBCT scans were used to print plastic 3D prints of the nasal cavities, which were also CBCT scanned and the measurements were compared. The results in vivo were higher than the results in vitro in maxillary sinus volumes with a ratio of 1.05 ± 0.01 (mean ± SD) and in the nasal cavities with a ratio of 1.20 ± 0.1 (mean ± SD). Linear measurements in vitro were very close to those in vivo . Rhinomanometric results showed some differences, but rhinomanometric graphs in vitro were close to the graphs in vivo . 3D printing proved to be a suitable and fast method for replicating nasal cavity structures and for the experimental testing of nasal function. It can be used as a complementary examination tool for rhinomanometry.