文章基本信息

标题：Experimental comparison between ZnO and MoS 2 nanoparticles as additives on performance of diesel oil-based nano lubricant
本地全文：下载
作者：Seyed Borhan Mousavi ; Saeed Zeinali Heris ; Patrice Estellé 等
期刊名称：Scientific Reports
电子版ISSN：2045-2322
出版年度：2020
卷号：10
期号：1
页码：1-17
DOI：10.1038/s41598-020-62830-1
出版社：Springer Nature
摘要：This study compares the tribological and thermophysical features of the lubricating oil using MoS2 and ZnO nano-additives. The average size of MoS2 and ZnO nanoparticles were 90 nm and 30 nm, respectively. The nanoparticles were suspended using Triton X-100 in three different concentrations (0.1, 0.4 and 0.7 wt.%) in a commercial diesel oil. Tribological properties such as mass loss of the pins, friction coefficient, and worn surface morphologies and thermophysical properties such as viscosity, viscosity index, flash point and pour point of resulting nano lubricant were evaluated and compared with those of pure diesel oil. The tribological behavior of nano lubricants was evaluated using a pin-on-disc tribometer. The worn surface morphologies were observed by scanning electron microscopy. The overall results of this experiment reveal that the addition of nano-MoS2 reduces the mass loss values of the pins in 93% due to the nano-MoS2 lubricant effect. With 0.7 wt.% in nanoparticles content, the viscosity of MoS2 and ZnO nano lubricants at 100 °C increased by about 9.58% and 10.14%, respectively. Pure oil containing 0.7 wt.% of each nanoparticle increased the flash point because of its small size and surface modifying behavior compared to the pure oil. Moreover, the addition of ZnO nanoparticles with pure oil lubricant is more suitable than MoS2 nanoparticles for improving the thermophysical properties of pure oil.