文章基本信息

标题：Re-Assembly of Archaeological Massive Limestones Using Epoxy Resin Modified with Nanomaterials—Part 2: Applied
本地全文：下载
作者：Mohammad A. Aldoasri ; Sawsan S. Darwish ; Mahmoud A. Adam 等
期刊名称：Green and Sustainable Chemistry
印刷版ISSN：2160-6951
电子版ISSN：2160-696X
出版年度：2020
卷号：10
期号：3
页码：72-90
DOI：10.4236/gsc.2020.103006
出版社：Scientific Research Publishing
摘要：This part of study represents the applied study; which is a continuation of the experimental study that was carried out in part 1 [1]. The experimental study in part 1 focused on evaluation of the effectiveness of Montmorillonite clay, calcium carbonate, and silicon dioxide nanoparticles for enhancing the performances of epoxy adhesives used in re-assembly of archaeological massive limestones. Based on the obtained results in part 1, the choice fell on epoxy-clay nanocomposites as the best re-assembly adhesive material reinforced with Stainless Steel to conduct the applied study project. The current applied study that represents a big project was carried out on 3 archaeological pharaonic massive limestones discovered separately in Ain Shams (Heliopolis) archaeological area in Egypt. The methodology included an accurate archaeological study, followed by analytical, and then the restoration and reassembly process. Firstly; in order to prove whether these artifacts are complementary to each other or not, then with a view to re-assembly and conserving these artifacts in the form of one stone block to be ready for museum display. Referred to the comprehensive archaeological and analytical study of the mentioned archeological stones, the results confirmed that, these stone pieces, in the original were one piece, therefore, it is possible to regrouping again to become one block complementary to each other, and this is what was done in this study.
关键词：Epoxy-Clay Nanocomposites;Re-Assembly;Pharaonic Massive Stones;Analytical Study;Stainless Steel Bars