文章基本信息

标题：WYZNACZENIE PUNKTÓW OSNOWY POMIAROWEJ W PROCESIE AEROTRIANGULACJI
其他标题：DETERMINING SURVEY CONTROL POINTS DURING THE PROCESS OF BUNDLE ADJUSTMENT
本地全文：下载
作者：Krystian Pyka ; Elżbieta Pastucha ; Andrzej Wróbel 等
期刊名称：Archiwum Fotogrametrii, Kartografii i Teledetekcji
印刷版ISSN：2083-2214
出版年度：2016
卷号：28
DOI：10.14681/afkit.2016.008
语种：English
出版社：Main Board of Association of Polish Surveyors
摘要：This paper presents the research on influence of tie points located on corners and ridges of rooftops on the process of bundle adjustment. A set of 40 aerial photographs with 10 cm GSD from ISOK project was used in the research. The bundle adjustment was calculated three times with three different sets of tie points. First one with automatically measured tie points,second with automatic tie points together with manually measured point on rooftops corners and ridges,and third one only with manually collected points on rooftops corners and ridges. Then all different solutions were compared. The results prove that the use of tie points located on corners and ridges of rooftops does not lower the accuracy of bundle adjustment solution,which achieves value about 0.5 pixel. The conclusion might seem to be of low importance from the perspective of process of bundle adjustment,but it has an utmost practical consequence. In accordance with Polish law tie points with coordinates obtained in bundle adjustment process can be used as survey network in land surveying. Typically tie points measurements adopt FBM/ABM matching. In consequence detected tie points are almost impossible to identify in the field. Furthermore automatic measurement of points located on corners and ridges of rooftops is almost an impossibility. Nevertheless,providing tie points measured manually,or collected in automatic or semi-automatic manner with a new different algorithm,could significantly help in land survey. Especially with land survey of building outlines,where measurements could be then easily tied to nearby points.
其他摘要：Przedmiotem artykułu jest określenie jaki wpływ na wyniki aerotriangulacji ma wprowadzenie punktów wiążących w postaci narożników dachów lub kalenic. W badaniach wykorzystano blok złożony z 40 zdjęć o GSD=10 cm,który wyrównano w kilku wariantach różniącyc
关键词：bundle adjustment;tie points;survey control network;building outline
其他关键词：aerotriangulacja;punkty wiążące;osnowa pomiarowa;kontur budynku