文章基本信息

标题：Numerical analysis of three-stage the forming process hollow forgings with an outer flange
本地全文：下载
作者：Łukasz Wójcik ; Tomasz Bulzak ; Grzegorz Winiarski 等
期刊名称：Scientific Journals of the Maritime University of Szczecin
印刷版ISSN：1733-8670
电子版ISSN：2392-0378
出版年度：2020
卷号：62
DOI：10.17402/429
语种：English
出版社：MUS
摘要：This article presents the results of computer simulations used to investigate the forming of a hollow coldworked forging with an outer flange. Numerical simulations were performed in Deform 2D/3D using a calculation module for axial-symmetric cases. A ϕ57×12.5 mm tube-shaped billet from 42CrMo4 grade steel was used. The forming process involved two and three stages, consisting of extrusion the shaft portion and forging the flange. The objective of this research was to determine the accuracy of the forming process used to produce the hollow part. This technology was analyzed using the effective strain distributions, the Cockcroft-Latham fracture criterion values, and the forming force progression. The results showed that it was possible to use this three-stage process to forge elements from a tube-shaped billet.
关键词：forging;extrusion;radial forging;hollow part;stepped shaft;flanging