文章基本信息

标题：Aerodynamic Drag Reduction and Optimization of MIRA Model Based on Plasma Actuator
其他标题：Aerodynamic Drag Reduction and Optimization of MIRA Model Based on Plasma Actuator
本地全文：下载
作者：Chenguang Lai ; Hang Fu ; Bo Hu 等
期刊名称：Actuators
电子版ISSN：2076-0825
出版年度：2020
卷号：9
期号：3
页码：64
DOI：10.3390/act9030064
出版社：MDPI Publishing
摘要：Active flow control of surface dielectric barrier discharge (SDBD) plasma is a technology that converts electrical energy into kinetic energy to achieve flow control. Its main application areas are concentrated in the aviation field. Undoubtedly, few studies have applied it in the field of automobile flow control. Meanwhile, during high-speed driving, there is a serious airflow separation phenomenon at the rear of notch-back cars, which brings a large area of negative pressure to the back of the cars. Due to the huge pressure difference between the front and end of the cars, it will increase the driving drag and fuel cost of the car. In this context, we seek to discuss the control effect on the airflow separation at the rear of the notch-back by using the phenomenological numerical simulation method of plasma flow control. Firstly, the plasma actuator is arranged separately on the rear end of the roof, c-pillar, upper and side of the trunk to study the control effect of airflow separation. After that, the plasma actuators at each position are combined and actuated simultaneously. We try to observe the control effect of airflow separation and select the combination with the best drag reduction effect. In the third stage, an efficient global optimization (EGO) algorithm based on kriging response surface is applied to optimize the supply voltage of the best combination that has been obtained before and obtain the driving voltage parameter of each actuator optimized under this combination. The results show that when plasma actuation is applied at four locations, only the actuation applied to the side of the luggage compartment has a significant drag reduction effect, while in other cases, the drag coefficient will increase. Specifically, drag reduction is better when the actuation is applied at four positions simultaneously. The maximum drag reduction coefficient of the car is reduced by 13.17%.
关键词：plasma actuator; MIRA model; active flow control; aerodynamic drag; efficient global optimization algorithm plasma actuator ; MIRA model ; active flow control ; aerodynamic drag ; efficient global optimization algorithm