文章基本信息

标题：Advanced Process Control to Minimize Disturbance in Gas Processing Facility (GPF)
本地全文：下载
作者：Safira Firdaus Mujiyanti ; Totok Ruki Biyanto
期刊名称：E3S Web of Conferences
印刷版ISSN：2267-1242
电子版ISSN：2267-1242
出版年度：2020
卷号：190
页码：1-11
DOI：10.1051/e3sconf/202019000037
出版社：EDP Sciences
摘要：For the gas treatment process, the process that occurs is separating the gas from the components of H 2 S, CO 2 , and H 2 O. The separation of gases from these components uses the aid of Amine fluid and TEG fluid. The unit that important in this process are Amine and TEG Contactor. To be able to separate the three components from the gas, the mass flow rate of Amine and TEG must be controlled so that the processing can work optimally. In reality in the field, the input of this process from the well is not always steady. So, this condition becomes a disturbance from the control process. The solution to minimize the disturbance of process with Advanced Process Control (APC). Therefore, this research will design APC on Amine and TEG Contactor to improve the stability of the mass flow response of Amine and TEG. In designing APC, the plant model is required first. Plant modelling obtained with software HYSYS and validated with MATLAB. The result shows the RMSE value below 5 %. The result proved to be able to make the process more stable from before design proven by slurries settling time, steadystate errors and maximum overshoot.
关键词：Control strategy; contactor; modelling