文章基本信息

标题：The process of increasing the stable operation of the working body in crank presses
本地全文：下载
作者：Kirill Kobzev ; Yuliya Goncharova ; Nataliya Kobzeva 等
期刊名称：E3S Web of Conferences
印刷版ISSN：2267-1242
电子版ISSN：2267-1242
出版年度：2020
卷号：164
页码：1-9
DOI：10.1051/e3sconf/202016403017
出版社：EDP Sciences
摘要：The article considers the study of the synthesized concept of frictional contact of solids in crank presses. As a result of the analysis the possibility of obtaining the maximum load characteristic of the friction contact within the interval of variation of the friction coefficient has been established. The possibility of equality of the values of the friction force of the friction contact at the boundaries of the indicated interval in the presence of a maximum and the achievement of their greatest stability under these conditions is also revealed. As result the upgraded concept of frictional contact allows theoretically to obtain a very high stability of the friction force, however, due to the relatively large value of the angle and force parameter, it is used inefficiently. A necessary condition for the absence of zero reversal of the output parameter of the main friction group of the friction contact in the interval of variation of the friction coefficient and the presence of the maximum function of the load capacity of the friction contact is the transfer of its full load by the sensitive elements of the additional friction group. An additional condition for the existence of a maximum is the need for the sensitive elements of the main friction group to transfer part of its full load at an equal number of friction pairs of both friction groups, and for the sensitive elements to transfer the full load of the main friction group at a lower number of friction pairs than in the additional friction group.