文章基本信息

标题：STRATEGI PERENCANAAN JUMLAH MATERIAL TAMBAHAN DALAM MEMPRODUKSI SEMEN DENGAN PENDEKATAN TAGUCHI UNTUK MEMINIMALKAN BIAYA PRODUKSI (STUDI KASUS PT SEMEN PADANG)
本地全文：下载
作者：Nelvi Irawati ; Nelvi Irawati ; Nelvi Irawati 等
期刊名称：Jurnal Optimasi Sistem Industri
印刷版ISSN：2088-4842
电子版ISSN：2442-8795
出版年度：2015
卷号：14
期号：1
页码：176-191
DOI：10.25077/josi.v14.n1.p176-191.2015
语种：Indonesian
出版社：Universitas Andalas
摘要：Cement is a construction material with a specific quality that must be meet standard requirements and customer requirements. Through a good and continuous quality control, it will produce cement with consistent quality as its Quality Planning. Cement quality is calculated after adding water by measuring its setting time, compressive strength developing, heat of hydration, expantion/ shrinkage, and its durability to environment effect. In cement application, primary parameter to determine cement quality is its compressive strength. Some factors that affect compressive strength of cement are reactivity and amount of Tricalcium Silicate (C3S) of Clinker, Clinker freelime (free CaO), amount of SO3 in Cement, amount of additional materials (insoluble residue/IR and loss on ignition/ LOI), and sieve on 45 µm residue of cement. This research is intended to find how insoluble residue/ IR, loss on ignition/ LOI, and amount of SO3 will affect compressive strength of cement. Various percentages of IR, LOI, and SO3 in cement will result different compressive strength. Taguchi Method is applied to determine material proportion. With Orthogonal Array calculation for 3 factors and 4 levels, it will result 16 calculation running times (L16 4**3). In laboratory scale, cement for this research has been being manufactured and then its compressive strength for 3 days, 7 days, and 28 days will be measured. Determination of optimal proportion will be calculated by statistic method for higher compressive strength and lower manufacturing cost.
关键词：Compressive strenght; cement; taguchi method; proportion