文章基本信息

标题：Application of MOORA method for multi optimization of GMAW process parameters in stain-less steel cladding
本地全文：下载
作者：Suha K. Shihab ; Noor Zaman Khan ; Pratyush Myla 等
期刊名称：Management Science Letters
印刷版ISSN：1923-9335
电子版ISSN：1923-9343
出版年度：2018
卷号：8
期号：4
页码：241-246
DOI：10.5267/j.msl.2018.2.002
出版社：Growing Science
摘要：Gas Metal Arc Welding (GMAW) is widely used to perform cladding so as to enhance corrosion resistance and several other properties of substrate material. However, the success of cladding using GMAW depends on the optimal selection of its critical parameters. Therefore, in this study, the cladding of stainless steel over mild steel substrate using GMAW process is investigated with an aim to optimize the GMAW process parameters. Three GMAW process parameters i.e. current, voltage, and torch angle were selected and their effect on the time required to complete the cladding and arc power was investigated and optimized. Multiple objective optimization based on ratio analysis (MOORA) method was employed to evaluate and optimize the effect of the selected process parameters. It was found that the current and voltage have significant effect in reducing the time and power required for the cladding process.
关键词：MOORA Cladding GMAW Optimization