文章基本信息

标题：Design and Fabrication of Corn De-Seeding Machine
本地全文：下载
作者：Pavan Kumar K P ; Kushal Gowda Y N ; Ravikumara M H 等
期刊名称：International Journal of Innovative Research in Science, Engineering and Technology
印刷版ISSN：2347-6710
电子版ISSN：2319-8753
出版年度：2018
卷号：7
期号：6
页码：6715-6722
DOI：10.15680/IJIRSET.2018.0706052
出版社：S&S Publications
摘要：In India, Maize is one of the most important crops and it has a source of a large number of industrial products besides its use as human food and animal feed. Maize is world’s largest resourceful seed crop. The techniques used to separate seed in old days are removing the leaf by hand or by chopping the corn by wooden rod. In this process the kernels were getting damaged and the rate of production was less. Another major problem now a day is that the cost of the machines that are available in the market is high and is not affordable by the farmers. In order to address the above problems, in this project design and fabrication of low cost corn de-seeding machine for de-seeding of corn without any damageshas been developed. The concept model of the machine was made by using AutoCAD software and required calculations were made. After freezing the concept, later it was converted into 3D model using CATIAsoftware. The fabrication of the model was done and the test was conducted.
关键词：Corn de;seeding; Kernels