文章基本信息

标题：Process parameters optima in quick-point grinding ceramics based on the intelligent algorithm
本地全文：下载
作者：Yunguang Zhou ; Lianjie Ma ; Yanqing Tan 等
期刊名称：Advances in Mechanical Engineering
印刷版ISSN：1687-8140
电子版ISSN：1687-8140
出版年度：2020
卷号：12
期号：1
页码：1-11
DOI：10.1177/1687814019900102
出版社：Sage Publications Ltd.
摘要：This article studied the relationship between surface roughness and surface micro hardness of the hard-brittle materials and the process parameters in quick-point grinding, and then established the prediction model for the surface micro hardness and surface roughness by the back propagation network which was an improved genetic algorithm. Through the experiments of the quick-point grinding of ceramics, surface roughness and surface micro hardness were tested, and reliability of the model was validated thereby. Based on the least square fitting of the experiment value and prediction value, the one-dimensional analytic model for surface roughness and surface micro hardness had been, respectively, developed in terms of grinding speed, grinder work-table feed speed, grinding depth, incline angle, and deflection angle as process parameters. Both the correlation test and experiment verification indicated that the model exhibited a high level of accuracy. The multivariate model of surface roughness and surface micro hardness can be constructed by means of immune algorithms and orthogonal experiment data. With the optimum objective of the minimum surface roughness and maximum surface micro hardness, a set of optimized process parameters was obtained using immune algorithms, and experiment verification proved that the error value was less than 10%.
关键词：Parameters optima; point grinding; hard-brittle materials; surface roughness; surface micro hardness; back propagation; neural network; immune algorithms
其他关键词：Parameters optima ; point grinding ; hard-brittle materials ; surface roughness ; surface micro hardness ; back propagation neural network ; immune algorithms