文章基本信息

标题：Characterization of peak shear strength of rough rock joints using limited displacement multi-stage direct shear (LDMDS) tests
本地全文：下载
作者：Mary MacLaughlin ; Steve Berry ; Michael Petro 等
期刊名称：E3S Web of Conferences
印刷版ISSN：2267-1242
电子版ISSN：2267-1242
出版年度：2019
卷号：92
页码：1-6
DOI：10.1051/e3sconf/20199213011
出版社：EDP Sciences
摘要：Current standard direct shear test methods for rock joints do not account for damage to the specimens' asperity profiles; tests require shearing of a single specimen to large displacements under successive normal stresses (the multistage test), or the use of similar specimens in multiple tests. Due to the inherently unique nature of rock joints and corresponding difficulty in obtaining specimens with identical or even similar geometries, multistage tests are more common. A major issue with the multistage test is that successive shearing of the specimen damages the surface asperities and changes its overall roughness profile, reducing the peak shear stress and consequently resulting in underestimation of the friction angle and overestimation of the joint shear intercept (cohesion). The limited displacement multistage direct shear (LDMDS) test method minimizes these testing imperfections by allowing shearing of a single specimen without extensive asperity damage, accomplished by immediately pausing shear displacement once peak shear stress has been reached, then proceeding to shear the specimen under the following normal stress value, and shearing into the post-peak region only after identifying multiple values of peak shear strength. The authors have validated the LDMDS procedure using cement replicates of rock joints, demonstrating that it yields more accurate strength parameters than the standard multistage direct shear test.
其他摘要：Current standard direct shear test methods for rock joints do not account for damage to the specimens' asperity profiles; tests require shearing of a single specimen to large displacements under successive normal stresses (the multistage test), or the use of similar specimens in multiple tests. Due to the inherently unique nature of rock joints and corresponding difficulty in obtaining specimens with identical or even similar geometries, multistage tests are more common. A major issue with the multistage test is that successive shearing of the specimen damages the surface asperities and changes its overall roughness profile, reducing the peak shear stress and consequently resulting in underestimation of the friction angle and overestimation of the joint shear intercept (cohesion). The limited displacement multistage direct shear (LDMDS) test method minimizes these testing imperfections by allowing shearing of a single specimen without extensive asperity damage, accomplished by immediately pausing shear displacement once peak shear stress has been reached, then proceeding to shear the specimen under the following normal stress value, and shearing into the post-peak region only after identifying multiple values of peak shear strength. The authors have validated the LDMDS procedure using cement replicates of rock joints, demonstrating that it yields more accurate strength parameters than the standard multistage direct shear test.