文章基本信息

标题：Technological Indicators of Direct Dumping Zone as a Part of Combined Mining Method
本地全文：下载
作者：Andrey Sysoev ; Elena Zlobina ; Igor Katanov 等
期刊名称：E3S Web of Conferences
印刷版ISSN：2267-1242
电子版ISSN：2267-1242
出版年度：2019
卷号：105
页码：1-6
DOI：10.1051/e3sconf/201910501050
出版社：EDP Sciences
摘要：Under the conditions of a combined mining system overburden is developed using a transport and non-transport technologies, specific costs for non-transport technology are lower than transport costs. The change in the non-transport bench height led to the redistribution of the volumes of transport and non-transport overburden. With an increase in the volume of non-transport overburden, the share of more expensive transport overburden is decreases, while the technical and economic indicators of the non-transport zone deteriorate due to an increase in re-excavation volumes. The change in the non-transport bench height affects the recasting ratio and the annual advance coal face line, which determine the cost of developing the overburden. This article presents the results of a study of the laws of change in the recasting ratio and the annual advance coal face line, depending on the non-transport bench height within a combined mining system of flat seam. The obtained patterns were established as a result of solving problems of substantiating typical excavation schemes of the direct dumping method and developing a mathematical model for identifying excavation schemes with the subsequent calculation of their technological indicators.
其他摘要：Under the conditions of a combined mining system overburden is developed using a transport and non-transport technologies, specific costs for non-transport technology are lower than transport costs. The change in the non-transport bench height led to the redistribution of the volumes of transport and non-transport overburden. With an increase in the volume of non-transport overburden, the share of more expensive transport overburden is decreases, while the technical and economic indicators of the non-transport zone deteriorate due to an increase in re-excavation volumes. The change in the non-transport bench height affects the recasting ratio and the annual advance coal face line, which determine the cost of developing the overburden. This article presents the results of a study of the laws of change in the recasting ratio and the annual advance coal face line, depending on the non-transport bench height within a combined mining system of flat seam. The obtained patterns were established as a result of solving problems of substantiating typical excavation schemes of the direct dumping method and developing a mathematical model for identifying excavation schemes with the subsequent calculation of their technological indicators.