摘要:The aim of the work is modelling of stressed condition of the loose mined rock thin layer between two parallel working plates of disintegrator, taking into consideration the dependences of the layer porosity and its side thrust coefficient on the main stress value with hereditary model of deformation accumulation. The equation of extreme balance of mined rock compactable thin layer is obtained for the case of its compression with partial sliding on working surfaces. It is shown, that there is no sliding in the central area of deformed zone, unlike the peripheral area. The iterative algorithm for parameters calculation of the layer stressed condition for the hypothesis of symmetric parabolic distribution of the axial normal stresses in the directions being perpendicular to the plates is developed. The distributions of the side thrust coefficient in the layer, the effective coefficient of external friction and the stresses of disintegrators working surfaces are grounded. The practical value of the research is the possibility to determine precisely the contact forces while crushing of fine-grained material taking into consideration its compactibility.