文章基本信息

标题：Waste-Energy (Heat) Recovery System from the Gases Compressed by an Oil-Free Screw Compressor
本地全文：下载
作者：Iulian Vlăducă ; Ramona Stanciuc ; Răzvan Bimbaşa 等
期刊名称：E3S Web of Conferences
印刷版ISSN：2267-1242
电子版ISSN：2267-1242
出版年度：2019
卷号：112
页码：1-8
DOI：10.1051/e3sconf/201911201012
出版社：EDP Sciences
摘要：During compression, a gas heats up, almost in all cases this heat being wasted, either by cooling the gas because it is too hot for the application, or by storing the gas and letting the compressed gas cool naturally in the storage tank. This paper presents a waste-energy (heat) recovery system from the gases compressed by an oil-free screw compressor. The gases compressed by this compressor have a very high temperature compared to an oil injected screw compressor, due to the fact that the oil used to lubricate the rotors also acts as a heat sink, the oil free variant which is used when you want a very high purity of the gas, has higher tolerances and more friction between the rotors which result in a higher gas temperature. The recovery system uses a heat exchanger to extract the waste energy from the gas and at the same time it will cool it for immediate use. Depending on the requirements, the energy recovered may be used immediately to produce useful work or stored for a later use. It may be used for heating a building, to produce steam for a turbine driving electrical generator, or in other forms.
其他摘要：During compression, a gas heats up, almost in all cases this heat being wasted, either by cooling the gas because it is too hot for the application, or by storing the gas and letting the compressed gas cool naturally in the storage tank. This paper presents a waste-energy (heat) recovery system from the gases compressed by an oil-free screw compressor. The gases compressed by this compressor have a very high temperature compared to an oil injected screw compressor, due to the fact that the oil used to lubricate the rotors also acts as a heat sink, the oil free variant which is used when you want a very high purity of the gas, has higher tolerances and more friction between the rotors which result in a higher gas temperature. The recovery system uses a heat exchanger to extract the waste energy from the gas and at the same time it will cool it for immediate use. Depending on the requirements, the energy recovered may be used immediately to produce useful work or stored for a later use. It may be used for heating a building, to produce steam for a turbine driving electrical generator, or in other forms.