文章基本信息

标题：A piezoelectric micro generator worked at low frequency and high acceleration based on PZT and phosphor bronze bonding
本地全文：下载
作者：Gang Tang ; Bin Yang ; Cheng Hou 等
期刊名称：Scientific Reports
电子版ISSN：2045-2322
出版年度：2016
卷号：6
期号：1
DOI：10.1038/srep38798
语种：English
出版社：Springer Nature
摘要：Recently, piezoelectric energy harvesters (PEHs) have been paid a lot of attention by many researchers to convert mechanical energy into electrical and low level vibration. Currently, most of PEHs worked under high frequency and low level vibration. In this paper, we propose a micro cantilever generator based on the bonding of bulk PZT wafer and phosphor bronze, which is fabricated by MEMS technology, such as mechanical chemical thinning and etching. The experimental results show that the open-circuit output voltage, output power and power density of this fabricated prototype are 35 V, 321 μW and 8664 μW cm(-3) at the resonant frequency of 100.8 Hz, respectively, when it matches an optimal loading resistance of 140 kΩ under the excitation of 3.0 g acceleration. The fabricated micro generator can obtain the open-circuit stable output voltage of 61.2 V when the vibration acceleration arrives at 7.0 g. Meanwhile, when this device is pasted on the vibrating vacuum pump, the output voltage is about 11 V. It demonstrates that this novel proposed device can scavenge high vibration level energy at low frequency for powering the inertial sensors in internet of things application.