摘要:Ultrafiltration (UF) and microfiltration (MF) are widely-used technologies to standardize the protein content of cheesemilk. Our previous work demonstrated that protein retention of a 0.1-µm MF spiral-wound membrane (SWM) was lower, but close to that of a 10 kDa UF one. Considering that the permeability of MF membranes is expected to be higher than that of UF ones, it was hypothesized that the former could improve the efficiency of the cheesemaking process. Consequently, the objectives of this work were to compare 0.1-µm MF and 10 kDa UF spiral-wound membranes in terms of (1) hydraulic and separation performance, (2) energy consumption and fouling behavior, (3) cheesemaking efficiency of retentates enriched with cream, and (4) economic performance in virtual cheesemaking plants. This study confirmed the benefits of using MF spiral-wound membranes to reduce the specific energy consumption of the filtration process (lower hydraulic resistance and higher membrane permeability) and to enhance the technological performance of the cheesemaking process (higher vat yield, and protein and fat recoveries). However, considering the higher serum protein retention of the UF membrane and the low price of electricity in Canada, the UF scenario remained more profitable. It only becomes more efficient to substitute the 10 kDa UF SWM by the 0.1-μm MF when energy costs are substantially higher.
关键词:efficiency; microfiltration; ultrafiltration; cheesemilk standardization; process simulation efficiency ; microfiltration ; ultrafiltration ; cheesemilk standardization ; process simulation