文章基本信息

标题：Ceramic Microbial Fuel Cells Stack: power generation in standard and supercapacitive mode
本地全文：下载
作者：Carlo Santoro ; Cristina Flores-Cadengo ; Francesca Soavi 等
期刊名称：Scientific Reports
电子版ISSN：2045-2322
出版年度：2018
卷号：8
期号：1
页码：3281
DOI：10.1038/s41598-018-21404-y
语种：English
出版社：Springer Nature
摘要：In this work, a microbial fuel cell (MFC) stack containing 28 ceramic MFCs was tested in both standard and supercapacitive modes. The MFCs consisted of carbon veil anodes wrapped around the ceramic separator and air-breathing cathodes based on activated carbon catalyst pressed on a stainless steel mesh. The anodes and cathodes were connected in parallel. The electrolytes utilized had different solution conductivities ranging from 2.0 mScm−1 to 40.1 mScm−1, simulating diverse wastewaters. Polarization curves of MFCs showed a general enhancement in performance with the increase of the electrolyte solution conductivity. The maximum stationary power density was 3.2 mW (3.2 Wm−3) at 2.0 mScm−1 that increased to 10.6 mW (10.6 Wm−3) at the highest solution conductivity (40.1 mScm−1). For the first time, MFCs stack with 1 L operating volume was also tested in supercapacitive mode, where full galvanostatic discharges are presented. Also in the latter case, performance once again improved with the increase in solution conductivity. Particularly, the increase in solution conductivity decreased dramatically the ohmic resistance and therefore the time for complete discharge was elongated, with a resultant increase in power. Maximum power achieved varied between 7.6 mW (7.6 Wm−3) at 2.0 mScm−1 and 27.4 mW (27.4 Wm−3) at 40.1 mScm−1.