首页    期刊浏览 2024年12月13日 星期五
登录注册

文章基本信息

  • 标题:Measurement point sampling method for inspection of parts with free-form surfaces
  • 作者:Dezhong Zhao ; Wenhu Wang ; Jinhua Zhou
  • 期刊名称:Advances in Mechanical Engineering
  • 印刷版ISSN:1687-8140
  • 电子版ISSN:1687-8140
  • 出版年度:2018
  • 卷号:10
  • 期号:11
  • DOI:10.1177/1687814018809577
  • 语种:English
  • 出版社:Sage Publications Ltd.
  • 摘要:Parts must be measured to evaluate the manufacturing accuracy in order to check whether their dimension is in expected tolerance. In engineering, parts with free-form surfaces are generally measured by high-precision coordinate-measuring machines. The measurement accuracy is usually improved by increasing the density of measurement points, which is time-consuming and costly. In this article, a novel sampling method of measurement points for free-form surface inspection is proposed. First, surface inspection is simplified into the inspection of a number of section curves of the surface. Second, B-spline curves constructed with an iterative method are employed to approximate these section curves. Subsequently, data points necessary to construct the B-spline curves are taken as the measurement points. Finally, the proposed method is compared with other two sampling methods. The results indicate that the proposed method greatly reduced the number of measurement points without decreasing the precision of surface modeling.
  • 关键词:Free-form surface; inspection; coordinate-measuring machines; measurement points; sampling strategy; B-spline
Loading...
联系我们|关于我们|网站声明
国家哲学社会科学文献中心版权所有