文章基本信息

标题：Parameter Optimisation of Aerobic Granular Sludge at High Temperature Using Response Surface Methodology
其他标题：Parameter Optimisation of Aerobic Granular Sludge at High Temperature Using Response Surface Methodology
本地全文：下载
作者：Syahira Ibrahim ; Norhaliza Abdul Wahab ; Aznah Nor Anuar 等
期刊名称：International Journal of Electrical and Computer Engineering
电子版ISSN：2088-8708
出版年度：2017
卷号：7
期号：3
页码：1522-1529
DOI：10.11591/ijece.v7i3.pp1522-1529
语种：English
出版社：Institute of Advanced Engineering and Science (IAES)
摘要：This paper proposes an improved optimisation of sequencing batch reactors (SBR) for aerobic granular sludge (AGS) at high temperature-low humidity for domestic wastewater treatment using response surface methodology (RSM). The main advantages of RSM are less number of experiment required and suitable for complex process. The sludge from a conventional activated sludge wastewater treatment plant and three sequencing batch reactors (SBRs) were fed with synthetic wastewater. The experiment were carried out at different high temperatures (30, 40 and 50°C) and the formation of AGS for simultaneous organics and nutrients removal were examined in 60 days. RSM is used to model and to optimize the biological parameters for chemical oxygen demand (COD) and total phosphorus removal in SBR system. The simulation results showed that at temperature of 45.33°C give the optimum condition for the total removal of COD and phosphorus, which correspond to performance index R2 of 0.955 and 0.91, respectively.
其他摘要：This paper proposes an improved optimisation of sequencing batch reactors (SBR) for aerobic granular sludge (AGS) at high temperature-low humidity for domestic wastewater treatment using response surface methodology (RSM). The main advantages of RSM are less number of experiment required and suitable for complex process. The sludge from a conventional activated sludge wastewater treatment plant and three sequencing batch reactors (SBRs) were fed with synthetic wastewater. The experiment were carried out at different high temperatures (30, 40 and 50°C) and the formation of AGS for simultaneous organics and nutrients removal were examined in 60 days. RSM is used to model and to optimize the biological parameters for chemical oxygen demand (COD) and total phosphorus removal in SBR system. The simulation results showed that at temperature of 45.33°C give the optimum condition for the total removal of COD and phosphorus, which correspond to performance index R 2 of 0.955 and 0.91, respectively.
关键词：aerobic granular sludge; high temperature; optimization; response surface methodology; sequencing batch reactor