文章基本信息

标题：Elimination of Honing Stick Mark in Rack Tube
本地全文：下载
作者：B.Parthiban ; N.Arul Kumar ; K.Gowtham Kumar 等
期刊名称：International Journal of Innovative Research in Science, Engineering and Technology
印刷版ISSN：2347-6710
电子版ISSN：2319-8753
出版年度：2017
卷号：6
期号：3
页码：4613
DOI：10.15680/IJIRSET.2017.0603224
出版社：S&S Publications
摘要：The main objective of the project is to reduce the tool tip mark produced during honing process inrack tube manufacturing. Rack tube is used in power steering, the hydraulic fluid acts inside the cylinder walls.Honing is an internal finishing process that uses abrasive particles on a rotating tool to produce extremely accuratedimensions and smooth surface finish. Similar to grinding and lapping process the abrasive particles are mountedon the rotating tool. During machining process tool have the working motion (both rotating and reciprocatingmotion). Work piece does not perform any motion. By the application of pressure acting on the tool, the tip marksare produced inside the work piece. To overcome this draw back. By changing the grain size of the hone stone thetool tip mark has been reduced and productivity increased
关键词：honing machine; stick mark; spindle; abrasive stick