文章基本信息

标题：Experimental Investigations and Analysis of Weld Characteristics of AISI 410 Using MIG Welding
本地全文：下载
作者：P. Ramu ; M. Sathis Kumar ; S. Selvadurai 等
期刊名称：International Journal of Innovative Research in Science, Engineering and Technology
印刷版ISSN：2347-6710
电子版ISSN：2319-8753
出版年度：2017
卷号：6
期号：3
页码：4280
DOI：10.15680/IJIRSET.2017.0603069
出版社：S&S Publications
摘要：Investigation of MIG welding parameter optimization for surface quality is very important to improvethe technology of MIG welding application. Weld bead size and shape are one of important considerations for designand manufacturing engineers. These welding parameters affecting the arc and welding bath should be estimated andtheir changing conditions during process must be known before in order to obtain optimum results, in this case thequality surface of overlap weld beads. The process parameters such as welding voltage, welding travel speed and wirefeet rate were studied. The experiments were conducted based on a Three-factor, three-level and L9 using Taguchimethod. Taguchi methods applied to improve the quality of welding with minimum number of trails. AISI410 is usedas the work piece material for carrying out the experimentation to optimize the surface quality and hardness value. Thesurface roughness was considered as the quality characteristic with the concept of "the smaller-the-better" and hardness“the larger-the-better. It is also predicted that Taguchi method is a good method for optimization of various inputparameters as it reduces the number of experiments.
关键词：MIG Welding.