文章基本信息

标题：Strip Thickness Control of Cold Rolling Mill
本地全文：下载
作者：Sanjeev Saxena ; Prof. Pushpendra Kumar Sharma
期刊名称：International Journal of Innovative Research in Science, Engineering and Technology
印刷版ISSN：2347-6710
电子版ISSN：2319-8753
出版年度：2017
卷号：6
期号：2
页码：3038
DOI：10.15680/IJIRSET.2017.0602173
出版社：S&S Publications
摘要：It’s possible for different kinds of automatic gauge control (AGC) systems working simultaneously toimpact and disturb each other while adjusting their moving directions. In order to implement a decoupling control, wemodified the parameters and structure of the AGC system in a hot rolling mill. In rolling mill, the accuracy and qualityof the strip exit thickness are very important factors. To realize high accuracy in the strip exit thickness, the AutomaticGauge Control (AGC) system is used. Because of roll eccen-tricity in backup rolls, the exit thickness deviatesperiodically. In this paper, we design PI controller in outer loop for the strip exit thickness while PD controller is usedin inner loop for the work roll actuator position. Also, in order to reduce the periodic thickness deviation, we proposeroll eccentricity compensation by using Fuzzy Neural Network with online tuning. Simulink model for the overallsystem has been implemented using MAT-LAB/SIMULINK software. The simulation results show the effectiveness ofthe proposed control.
关键词：Cold Rolling Mill; Thickness Control; Roll Eccentricity; Eccentricity Compensation