文章基本信息

标题：Optimization of Surface Roughness of 6463 Aluminium Alloy and Brass Materials in CNC Milling Operation Using Taguchi's Design
本地全文：下载
作者：Y.Chandra Sekhar ; A.Gopichand ; R Sam Sukumar 等
期刊名称：International Journal of Innovative Research in Science, Engineering and Technology
印刷版ISSN：2347-6710
电子版ISSN：2319-8753
出版年度：2017
卷号：6
期号：2
页码：1553
DOI：10.15680/IJIRSET.2017.0602018
出版社：S&S Publications
摘要：Surface roughness is an important measure of the technological quality of a product and a factor thatgreatly influences manufacturing cost. Decreasing the surface roughness value in the manufacturing field improves endproducts quality. The optimization of high speed milling process parameters with respect to the surface roughness ofsamples and the study of the Taguchi design application to surface quality was experimented by using CNC end millingoperation. The Taguchi design is an efficient and effective experimental method in which a response variable can beoptimized by giving various control factors. An orthogonal array of L9 was used to carry out and to identify thesignificant factors affecting surface roughness. In the present investigation, the straight flute end-milling cutter wasused for machining of 6463 Aluminium alloy and brass work pieces. The factors related to surface roughness arecutting speed, feed rate and depth of cuts. Confirmation test with optimal levels of machining parameters were carriedout in order to illustrate the effectives of Taguchi’s optimization method.
关键词：Optimization; Surface Roughness; Taguchi; Milling.