文章基本信息

标题：Experimental and Finite Element Analyses of an I-Shaped Prototype for Different Orientations and Thicknesses
本地全文：下载
作者：M. Harish Yadav ; G. Suresh Kumar ; Dr.Y.V. Mohan Reddy 等
期刊名称：International Journal of Innovative Research in Science, Engineering and Technology
印刷版ISSN：2347-6710
电子版ISSN：2319-8753
出版年度：2016
卷号：5
期号：9
页码：17058
DOI：10.15680/IJIRSET.2016.0509079
出版社：S&S Publications
摘要：Rapid Prototyping (RP) has been a powerful technology for preparing Prototypes of complex parts andproducts. In the present work, Fused Deposition Modelling concept of RP is used to prepare I-Shaped prototype usingAcrylonitrile Butadiene Styrene (ABS). Two orientations, namely, Horizontal-Vertical (00 / 900) and Criss-Cross (+450/-450) orientation for the layers have been used. Also different thicknesses of prototype are considered (3mm, 4mm,5mm & 6mm) for experimentation. By preparing different orientation-thickness combinations of the prototype,vibrational analysis is carried out and frequencies and deflections are determined. Also, finite element analysis iscarried out using ANSYS software, and the results obtained are compared with the experimental results.
关键词：Rapid prototyping; Fused Deposition Modelling; Fabrication; Vibration; Frequency; ANSYS;WORKBENCH; Acrylonitrile Butadiene Styrene (ABS).