文章基本信息

标题：Gamma irradiation effects in optical fibres, splitters, and connectors
本地全文：下载
作者：Srećković, Milesa Ž. ; Pantelić, Slađana N. ; Stanković, Srboljub J. 等
期刊名称：Nuclear Technology and Radiation Protection
印刷版ISSN：1451-3994
出版年度：2017
卷号：32
期号：4
页码：375-380
DOI：10.2298/NTRP1704375S
出版社：VINČA Institute of Nuclear Sciences
摘要：The paper presents a brief overview of contemporary ELION techniques with stress on their use for material modification and dosimetry. In the attempt to avoid some common misjudges of irradiation effects, special attention is paid to exact definition of irradiation geometry and careful adjustment of dose rates, which enable a proper elaboration of experimental results. In particular, effects of g-rays irradiation on properties of commercial optical fibres, splitters, connectors, and fibre joints are examined, which enables monitoring of irradiation effects in complex configurations made of materials with different radiation hardness (resistance). It has been established that g-rays irradiation of the investigated elements influences, in different ways, the transmission of laser beam signals of various wavelengths, under different modulation regimes. After irradiation, the signal attenuation is noticeably larger, both in optical connectors and optical splitter, than before it, and the effect increases in time. The effects are more pronounced at the 99 % than at the 1 % Y-splitter output at both measured wavelengths, and are more pronounced at 1310 nm than at 1550 nm. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. III43009 and Grant no. III45012]
关键词：g-irradiation; fibre; optical connector; material property; laser signal propagation; dosimetry; hardness