文章基本信息

标题：Tooth Fracture Detection in Spiral Bevel Gears System by Harmonic Response Based on Finite Element Method
本地全文：下载
作者：Yuan Chen ; Rupeng Zhu ; Guanghu Jin 等
期刊名称：Journal of Control Science and Engineering
印刷版ISSN：1687-5249
电子版ISSN：1687-5257
出版年度：2017
卷号：2017
DOI：10.1155/2017/3169172
出版社：Hindawi Publishing Corporation
摘要：Spiral bevel gears occupy several advantages such as high contact ratio, strong carrying capacity, and smooth operation, which become one of the most widely used components in high-speed stage of the aeronautical transmission system. Its dynamic characteristics are addressed by many scholars. However, spiral bevel gears, especially tooth fracture occurrence and monitoring, are not to be investigated, according to the limited published issues. Therefore, this paper establishes a three-dimensional model and finite element model of the Gleason spiral bevel gear pair. The model considers the effect of tooth root fracture on the system due to fatigue. Finite element method is used to compute the mesh generation, set the boundary condition, and carry out the dynamic load. The harmonic response spectra of the base under tooth fracture are calculated and the influence of main parameters on monitoring failure is investigated as well. The results show that the change of torque affects insignificantly the determination of whether or not the system has tooth fracture. The intermediate frequency interval (200 Hz–1000 Hz) is the best interval to judge tooth fracture occurrence. The best fault test region is located in the working area where the system is going through meshing. The simulation calculation provides a theoretical reference for spiral bevel gear system test and fault diagnosis.