文章基本信息

标题：A new speed optimization algorithm with application in pickling and rolling line
本地全文：下载
作者：Xiaoyan Zhu ; Li Wang ; Dianhua Zhang 等
期刊名称：Advances in Mechanical Engineering
印刷版ISSN：1687-8140
电子版ISSN：1687-8140
出版年度：2016
卷号：8
期号：4
DOI：10.1177/1687814016646502
语种：English
出版社：Sage Publications Ltd.
摘要：In order to reduce equipment wear and operator pressure, as well as to improve the production efficiency of combined continuous pickling line and tandem cold rolling mill units, four sections’ speeds should be automatically optimized to control the three loopers’ abundance, which include the entry loopers’ entry speed, pickling speed, trimming speed, and tandem cold rolling mill entry speed. According to the optimal speed principle, a new optimization algorithm was proposed based on objective function. In this work, Nelder–Mead simplex method is applied to find the optimal solution by minimizing the objective function. In addition, the calculation of four initial speeds is specified, especially the initial tandem cold rolling mill entry speed. The proposed speed optimization algorithm was successfully applied to a 1450 mm continuous pickling line and tandem cold rolling mill. The acceleration and deceleration are smooth and steady when welding, trimming, or roll changing takes place in practice, the three loopers’ abundance are controlled in suitable range. Results show that the continuous pickling line unit could provide the material in maximum capacity to ensure that the tandem cold rolling mill unit’s production is efficient, and the rolling yield is greatly improved due to the decrease in the number of stops.
关键词：Speed optimization; continuous pickling line; process control; objective function; Nelder–Mead simplex method