文章基本信息

标题：Influence of pick working angle on cutting performance of auger miner’s aiguille
本地全文：下载
作者：Lin Fu ; Changlong Du ; Jianping Li 等
期刊名称：Advances in Mechanical Engineering
印刷版ISSN：1687-8140
电子版ISSN：1687-8140
出版年度：2015
卷号：7
期号：5
DOI：10.1177/1687814015585427
语种：English
出版社：Sage Publications Ltd.
摘要：To study the influence of pick working angles on cutting performance of auger miner’s aiguille, aiguilles with different pick working angles were developed and their performance were tested on coal cutting test-bed. Cutting performance evaluation system of the aiguille was established first, and then evaluation indexes such as average load, load fluctuation coefficient, and specific energy were analyzed by statistical method. The research indicates that the torque and specific energy of the aiguille decrease first and then increase with increased pick working angles. The feed resistance decreases with the increase in two working angles. The energy consumed by the feed resistance is very small relative to the total energy and can be ignored. When the cutting angle is between 45° and 50° and the tilt angle is about 20°, the torque and specific energy of the aiguille will be at a minimum and the load stability of the aiguille will also be ideal.
关键词：Auger miner; aiguille; pick working angle; cutting performance