文章基本信息

标题：Study of the Potential of a Local Geoid Model for Extracting the Orthometric Heights from GPS Measurements in Topographic Works
本地全文：下载
作者：Yehia H. Miky ; Reda Yaagoubi ; Ahmed El Shouny 等
期刊名称：Civil and Environmental Research
印刷版ISSN：2225-0514
电子版ISSN：2225-0514
出版年度：2017
卷号：9
期号：7
页码：16-28
语种：English
出版社：The International Institute for Science, Technology and Education (IISTE)
摘要：Due to the rapid development and expansion of geodetic applications, the determination of orthometric heights in an accurate manner is considered as one of the most required conditions to carry out such projects. Obtaining orthometric heights using traditional methods of levelling is time and cost consuming. Hence, investigating other techniques that provide the same accuracy, as leveling methods, but requiring less time and cost is very gainful. Recently, satellite positioning techniques and their applications are being used increasingly in geodetic projects. So, it is interesting to study the efficiency of such techniques for obtaining orthometric heights. GPS methods provide highly accurate measurement of ellipsoidal heights. However, the conversion of ellipsoid heights to orthometric heights may be achieved using geoid models. The objective of this research is to study the efficiency of using a local geoid model as an alternative method to obtain orthometric heights from GPS measurements. This paper proposes a methodology to generate such local geoid models. Then, the results of using the generated local geoid model for Jeddah city in Saudi Arabia are presented. These results indicate that the difference among estimated undulations values from the local geoid model and undulations values calculated from leveling techniques ranges from 1.8 cm to -1.1 cm. with a maximum standard deviation of 56 mm. These results confirm that the creation of a local geoid model is an effective method that gives the required accuracy for topographic works.
其他摘要：Due to the rapid development and expansion of geodetic applications, the determination of orthometric heights in an accurate manner is considered as one of the most required conditions to carry out such projects. Obtaining orthometric heights using traditional methods of levelling is time and cost consuming. Hence, investigating other techniques that provide the same accuracy, as leveling methods, but requiring less time and cost is very gainful. Recently, satellite positioning techniques and their applications are being used increasingly in geodetic projects. So, it is interesting to study the efficiency of such techniques for obtaining orthometric heights. GPS methods provide highly accurate measurement of ellipsoidal heights. However, the conversion of ellipsoid heights to orthometric heights may be achieved using geoid models. The objective of this research is to study the efficiency of using a local geoid model as an alternative method to obtain orthometric heights from GPS measurements. This paper proposes a methodology to generate such local geoid models. Then, the results of using the generated local geoid model for Jeddah city in Saudi Arabia are presented. These results indicate that the difference among estimated undulations values from the local geoid model and undulations values calculated from leveling techniques ranges from 1.8 cm to -1.1 cm. with a maximum standard deviation of 56 mm. These results confirm that the creation of a local geoid model is an effective method that gives the required accuracy for topographic works. Keywords: GPS/Levelling method, Local geoid model, Krigging method.
关键词：GPS/Levelling method; Local geoid model; Krigging method.