摘要:Understanding the relationships between the Australian economic system and waste generation from intermediate sectors and households is a prerequisite for planning and implementing waste management strategies at a national scale. Data of waste generation accounts link to those of national economic accounts. However, in Australia, some years’ data are absent and so these links cannot be made. To rectify this data gap, this paper interpolates and extrapolates the Australian input-output table (IOT) of 2010–2011. Waste input-output (WIO) analysis is then used to assess the effects of the Australian economy on waste generation and treatment between 2009–2010 and 2010–2011. Analysis indicated that the result of interpolation was more reasonable than that of extrapolation, and the interpolation of the Australian IOT of 2010–2011 can be applicable. This comparative analysis of the time series data in WIO model has identified that: (1) per million $AUD of output of the Construction sector generated the most amount of direct and total waste during the period; (2) the relationships between the development of Australian economy and waste generation illustrate that the Australian economy is currently a traditional linear economy; (3) the effectiveness of waste-related policies are shown by the growth of the sums of direct and total effects of intermediate sectors on the Recovery sector; and (4) the amount of waste generated by households increased sharply over the two years. The physical flows of waste footprint show details of waste generation and treatment in the Australian economic system. The information provided in this paper is beneficial to formulate tailor-made policies for waste management in Australia.