文章基本信息

标题：Occupational Exposure to Lead
本地全文：下载
作者：Giovanni CARELLI ; Oliviero MASCI ; Augusto ALTIERI 等
期刊名称：Industrial Health
印刷版ISSN：0019-8366
电子版ISSN：1880-8026
出版年度：1999
卷号：37
期号：3
页码：313-321
DOI：10.2486/indhealth.37.313
出版社：National Institute of Occupational Safety and Health
摘要：The amount of airborne lead absorbed by the body during occupational exposure depends not only on lead concentration in workplace air, but also on the granulometric distribution of the aerosol. The Occupational Safety and Health Administration (OSHA) set the lead Permissible Exposure Limit (PEL) at 50μg/m³ on the basis of Bernard's model and a number of assumptions, including assumption “C”, which predicts that the first 12.5μg/m³ are made up of fine particles (aerodynamic diameter <1μm) whereas the remaining 12.5μg/m³ consist of particles >1μm. Occupational exposure to airborne lead at a concentration of 50μg/m³ and a granulometric distribution calculated according to the above mentioned assumption, leads, in the model, to a mean blood level of 40μg/dl. In the present study, we tested the validity of assumption “C” in the environmental air of a factory that manufactured crystal glassware containing 24% lead oxide. An 8-stage impactor was used to measure the particle size of airborne dust collected from personal and area samplings. Results indicate that, on the whole, assumption “C” cannot be considered valid in the work environment investigated in this study. As a result, lead absorption levels in exposed workers may be noticeably different from those predicted by the OSHA model. We therefore suggest that in order to make a correct evaluation of the risk of occupational exposure to lead, it is essential to integrate total airborne lead concentration with a measurement of the granulometric distribution of the aerosol.
关键词：Airborne lead particle size;Lead occupational exposure;Blood lead;Environmental lead monitoring;Crystal airborne particulate;Lead OSHA Permissible Exposure Limit