摘要：Hybrid measurement-based approaches to worst-case execution time (WCET) analysis combine measured execution times of small program segments using static analysis of the larger software structure. In order to make the necessary measurements, instrumentation code is added to generate a timestamped trace from the running program. The intrusive presence of this instrumentation code incurs a timing penalty, widely referred to as the probe effect. However, recent years have seen the emergence of trace capability at the hardware level, effectively opening the door to probe-free analysis. Relying on hardware support forces the WCET analysis to the object-code level, since that is all that is known by the hardware. A major disadvantage of this is that it is expensive for a typical software engineer to interpret the results, since most engineers are familiar with the source code but not the object code. Meaningful WCET analysis involves not just running a tool to obtain an overall WCET value but also understanding which sections of code consume most of the WCET in order that corrective actions, such as optimisation, can be applied if the WCET value is too large. The main contribution of this paper is a mechanism by which hybrid WCET analysis can still be performed at the source level when the timestamped trace has been collected at the object level by state-of-the-art hardware. This allows existing, commercial tools, such as \rapitime{}, to operate without the need for intrusive instrumentation and thus without the probe effect.
Loading...
