文章基本信息

标题：Plastic Ball Grid Array Encapsulation Process Simulation on Rheology Effect
本地全文：下载
作者：Dadan Ramdan ; Mohd Zulkifly Abdullah ; Khor Chu Yee 等
期刊名称：TELKOMNIKA (Telecommunication Computing Electronics and Control)
印刷版ISSN：2302-9293
出版年度：2011
卷号：9
期号：1
页码：27-36
语种：English
出版社：Universitas Ahmad Dahlan
摘要：The integrated circuit should be encapsulated for protection from their intended environment. This paper presents the flow visualization of the plastic ball grid array (PBGA) chip encapsulation process considering of the rheology effect. In the molding process, encapsulant flow behavior is modeled by Castro-Macosko viscosity model with considering curing effect and volume of fluid technique is applied for melt front tracking. The viscosity model is written into C language and compiled using User-Defined Functions into the FLUENT analysis . Three types of Epoxy Molding Compound namely case 1, 2, and 3 were utilized for the study of fluid flow inside the mold cavity. The melt front profiles and viscosity versus shear rate for all cases are analyzed and presented. The numerical results are compared with the previous experimental results and found in good conformity. In the present study, case 1 with greater viscosity shows the higher air trap and higher pressure distributions.