文章基本信息

标题：An Experimental Investigation of Machinability of Stainless Steel 316 Using Brass Electrodes
本地全文：下载
作者：G.Pradeep Kumar ; M.Soundarrajan ; P.Rajkumar 等
期刊名称：International Journal of Innovative Research in Science, Engineering and Technology
印刷版ISSN：2347-6710
电子版ISSN：2319-8753
出版年度：2015
期号：MULTICON
页码：640
出版社：S&S Publications
摘要：The selection of optimum process parameters is time consuming and costly process. This study mainlyfocuses on the selection of optimum process parameters for the combination of work material stainless steel 316L andSolid & Hollow tool electrode of Brass material having 3 mm diameter. The Material has been experimentallyinvestigated for its machinability using Z-axis numerically controlled (ZNC) electro discharge machining (EDM)process. The effects of the four process parameters, namely, current, gap voltage, pulse-on time, and pulse-off time areinvestigated on material removal rate (MRR), tool wear rate (TWR), and Overcut (OC) by varying one parameter at atime approach. Totally a set of 28 experiments with two trials has to be done by using each tool material and for everymachining the readings are to be tabulated and corresponding graphs are to be drawn.
关键词：SS 316; Solid & Hollow tubes of Brass electrode; One Parameter varying approach; MRR; TWR and;Overcut.