文章基本信息

标题：Automated defect detection and regulation in wind power plants based on CAN Network
本地全文：下载
作者：M.Mohanraj ; S.Nandini ; Rani Thottungal 等
期刊名称：International Journal of Advanced Research in Computer Engineering & Technology (IJARCET)
印刷版ISSN：2278-1323
出版年度：2015
卷号：4
期号：1
页码：54-58
出版社：Shri Pannalal Research Institute of Technolgy
摘要：Wind energy has emerged as one of the most important and economical renewable energy source. The generated electricity is from the air currents flowing across the earth's surface. Today, electricity generating wind turbines employ proven and approved technology, and provide a sheltered and reliable energy supply. Wind Turbines are located in remote areas mostly, where there are rigid environmental conditions. There is a great obligation to monitor the turbines to detect impending failures. This paper aims at monitoring the wind turbine parameters and intimation at the impending failure conditions. Wind turbine monitoring system collects the parameters such as Speed, Temperature, vibration, voltage and current from the essential components of turbines such as shaft, gear box, generator and nacelle by using respective sensors. The data are periodically updated to the control center. Depending on the data that has been collected from the monitoring system, manipulations are done and the fault control system makes the decision of location and the type of fault that has occurred in the wind turbine. In case of any abnormal conditions, we can automatically shutdown the turbine for a period of time, till the parameters become normal. We use CAN Network to communicate between the Wind turbine and the control center . PIC Mictrocontroller is used for monitoring and control operations and it uses a master-slave configuration.The GSM Module is used to intimate the owner with an SMS when abnormal conditions occur and indicate the fault type.
关键词：CAN protocol;GSM; PIC Microcontroller; Sensors; Wind turbine.