文章基本信息

标题：Finding Cutting Forces While Turning Aperation on Lathe Machine at Different Depth of Cut of Different Metals
本地全文：下载
作者：B.TULASIRAMARAO ; DR.K.SRINIVAS ; DR. P RAM REDDY 等
期刊名称：International Journal of Innovative Research in Science, Engineering and Technology
印刷版ISSN：2347-6710
电子版ISSN：2319-8753
出版年度：2014
卷号：3
期号：10
页码：16866
DOI：10.15680/IJIRSET.2014.0310065
出版社：S&S Publications
摘要：In this study, a lathe tool dynamometer that can measure cutting force, feed force and also thrust/Axial force by using strain gauge accelerometer has been Studied and used. The dynamometer used in this project is a 500kg force 3- component system. The dynamometer is connected to a data acquisition system. As the tool comes in contact with the work piece the various forces developed are captured and transformed into numerical form system. In this project various forces for four different materials have been noted down and the materials used in this project are aluminum, brass, mid steel & nylon. The forces on these materials with variation in depth of cut are studied. Graphs are drawn on how these forces vary due to variation in dept h of cut.
关键词：Depth of cut; Cutting speed and cutting force