PURPOSE: To know biomechanical differences in methods of limb lengthening between using monolateral external fixator and using external fixator over an intramedullary nail. MATERIALS AND METHODS: In acryl rods, saw-bone, and cadeveric bone, we created two lengthening models of using monolateral external fixator and using external fixator over an intramedullary nail. The axial compression test was done on the site of osteotomy for lengthening. To fix the models, half pins of 5 mm in diameter and nails of 9 mm in diameter were used. Using MTS (Material Test System) machine, we evaluated the differences of axial stiffness according to the presence of an intramedullary nail or the numbers of half-pins which were fixed at each side of osteotomy. RESULTS: Lengthening over an intramedullary nail, comparing to monolateral external fixator only, increased the axial stiffness by 1.1~1.2 times in acryl rods, 1.2~1.6 times in saw bones, and 15.6~15.9 times in cadeveric bones when the same numbers of half-pins were used. In saw bone and cadaveric bone, the group of two half pins in lengthening over an intramedullary nail was stiffer than the group of three pins in lengthening with monolateral external fixator. CONCLUSION: In the distraction of the limb, the addition of an intramedullary nail may increase the axial stiffness of the frame of monolateral external fixator. In lengthening over an intramedullary nail, it is enough to distract the bone with fixing two half pins at each sides of osteotomy.