文章基本信息

标题：Optimization of Machining Parameters in Dry Turning of IS 2062 with Taguchi Technique
本地全文：下载
作者：Saadat Ali Rizvi ; Wajahat Ali
期刊名称：International Journal of Innovative Research in Science, Engineering and Technology
印刷版ISSN：2347-6710
电子版ISSN：2319-8753
出版年度：2015
卷号：4
期号：8
页码：7722
DOI：10.15680/IJIRSET.2015.0408108
出版社：S&S Publications
摘要：Soft steel i,e Mild Steel material is commonly used to produce automotive parts such as shafts, gears andbearings Machining this material significantly increases the temperature in the cutting zone and is critical in decidingworkpiece quality. The Taguchi optimization method is used with standard orthogonal array L27(3)3 .Surface quality is oneof the most impellent customer requirements in machining. The main aspect of surface quality on machined parts isprobably surface integrity, such as roughness and residual stresses.This paper optimizes multiple characteristics (cuttingspeed, feed rate and depth of cut) in CNC turning of Mild steel by high speed cutting tools. Three controllable factors of theturning process viz. cutting speed, feed and depth of cut, were studied. In this study, the Taguchi method a powerful tool forexperiment design is also used to optimize the cutting parameters to achieve better surface finish and to identify the mosteffective parameter for cost evolution during turning. Taking significant cutting parameters into consideration and usingmultiple linear regressions, mathematical model relating to the surface roughness height Rais established to investigate theinfluence of cutting parameters during turning. It is seen that the insert radius, feed rate, and depth of cut havedifferenteffects on the surface roughness.
关键词：CNC turning; Taguchi method; Machining; Machinability; Tool wear