文章基本信息

标题：Ahmed K., Nizami S. S., Aijaz M.,
本地全文：下载
作者：Ahmed K. ; Nizami S. S. ; Aijaz M. 等
期刊名称：Journal of Materials and Environmental Science
印刷版ISSN：2028-2508
出版年度：2015
卷号：6
期号：7
页码：2021-2027
出版社：University of Mohammed Premier Oujda
摘要：In utilization gradually more spirited soak, the endurance of industries that fabricate modules or parts of polymer is definitely linked to reduce the manufacturing costs. A substitute could be uncompatibilized and chlorinated polyethylene (CPE) compatibilized blends of nitrile rubber (NBR)/Low density polyethylene (LDPE) filled by industrial waste (MW) for the production of thermoplastic elastomers (TPEs) blends. The TPEs were evaluated through the cure, resilience and abrasion loss characteristics of blends, facilitating the performance scrutinizing of the fabrication procedures and applications to design the components. Comparable results are obtained with, and without CPE in the blends. As the ratio of LDPE in blends increased, the scorch time and cure time decreased and at same time, the elasticity of blends drop and torque increased and the resilience, which decreased for the cure systems. Compounds with the higher LDPE and CPE content had greater the both torque values, higher vulcanization rates, and the lower scorch, cure times, resilience and abrasion loss. These observations indicated more viscous along with less elastic replies in these blends. Results of this investigation expose that CPE could be used as a compatibilizer for the NBR/LDPE blend system.
关键词：chlorinated polyethylene; thermoplastic elastomers; Abrasion