文章基本信息

标题：Different Impact on the Stability Limits Caused by the Selection of Milling Force Coefficient under the State of High-Speed Milling
本地全文：下载
作者：Zhao Can ; Tao GuangFu ; Liu Yubo 等
期刊名称：International Journal of Hybrid Information Technology
印刷版ISSN：1738-9968
出版年度：2015
卷号：8
期号：8
页码：153-160
DOI：10.14257/ijhit.2015.8.8.14
出版社：SERSC
摘要：To analyze the influence caused by different cutting parameters on the cutting force and get the coefficient of milling force obtained under the state of high-speed milling, the high-speed milling test was conducted through carbide cutting tools milling the titanium impeller under the state of high speed. Firstly, the influence on the three target force, caused by every parameter, was analyzed through orthogonal experiment. And then, the milling force coefficient got from two different formula was compared in this article. Calculated and experimental results show that the milling force coefficient got by means of the empirical formula reduced flutter stability limit, however, he milling force coefficient got by means of parsing not. At last, it also provide data to support to avoid the chatter occurred between tool and workpiece and select the processing parameters optimally.
关键词：Stability limit; Coefficient of milling force; High-speed cutting; Titanium